Skip to main content
Business Day Calculator

Late Payment Interest Calculator

Last reviewed: October 14, 2026

Calculate statutory or contractual interest on a past-due commercial invoice. Built-in rules cover the UK Late Payment Act, the minimum rate of the EU Late Payment Directive, Germany's § 288 BGB, the French Code de commerce rate and the Indian MSMED Act. For the other countries in the list the calculator holds no statutory rate and applies the rate you enter.

Use it to chase a slow-paying client, draft a recovery letter, or pressure-test a contract's interest clause before you sign. Pair with the invoice due date calculator to confirm exactly when payment was due.

No statutory rate is built in for the United States. FAR subpart 32.9 covers invoice payments on federal government contracts, not payments between private businesses. Enter the rate your contract states.

Total amount due

$5,032.88

Principal

$5,000.00

Interest

$32.88

Days late

30

Effective rate: 8.00% per year

Calculation: $5,000.00 × 8.00% × (30 / 365) = $32.88

Reference: No United States statutory rate built in; FAR subpart 32.9 (prompt payment) covers invoice payments on federal government contracts. Verify current rate

How statutory rates work in different countries

The table below lists the frameworks built into the calculator. Statutory means the law sets the rate, and it applies even where the contract says nothing. Contractual means the calculator holds no statutory business-to-business rate for that country and uses the rate you enter: the one in the contract or, where the contract is silent, the rate the applicable law provides.

JurisdictionModeReference
United KingdomStatutoryLate Payment of Commercial Debts (Interest) Act 1998, ss 4 and 5A; Rate of Interest (No. 3) Order 2002, art. 4
EU (Directive 2011/7/EU minimum)StatutoryLate Payment Directive 2011/7/EU, arts 2(6)-(7) and 3(2): ECB main refinancing rate on 1 January or 1 July plus at least 8 points
United StatesContractualNo United States statutory rate built in; FAR subpart 32.9 (prompt payment) covers invoice payments on federal government contracts
CanadaContractualInterest Act (R.S.C. 1985, c. I-15), ss 3 and 4
AustraliaContractualNo statutory B2B late-payment rate built in; the contract's rate applies
IndiaStatutoryMSMED Act 2006, ss 15 and 16: three times the bank rate notified by the Reserve Bank of India, compounded with monthly rests
PhilippinesContractualCivil Code arts 1956 and 2209; Bangko Sentral ng Pilipinas Circular No. 799, Series of 2013
GermanyStatutoryBGB § 288 (2) and (5); § 247 (Basiszinssatz)
FranceStatutoryCode de commerce, art. L441-10 (ECB refinancing rate plus 10 points) and D441-5 (40 euro per invoice)
JapanContractualCivil Code arts 404 and 419(1); statutory rate 3 percent for 1 April 2026 to 31 March 2029 (Ministry of Justice)
SingaporeContractualRules of Court 2021, O. 17 r. 5(1): 5.33 percent a year on money payable under a court order, absent agreement
MexicoContractualNo statutory B2B late-payment rate built in; the contract's rate applies

Worked example: UK B2B invoice paid 47 days late

A consultancy in Manchester invoices a business client £5,000 on 1 April 2026 with payment agreed for 1 May 2026, and the client pays on 17 June 2026, 47 days after the agreed day. Under section 4 of the Late Payment of Commercial Debts (Interest) Act 1998, statutory interest runs from the day after the agreed payment day, and the 2002 rate order sets it at 8 per cent over the Bank of England rate in force on the 31 December before it starts to run. Bank Rate was 3.75 percent on 31 December 2025, so the rate is 11.75 percent. Interest = 5,000 × 0.1175 × 47 / 365 = £75.65. Section 5A adds a fixed sum of £70 for a debt of £1,000 or more but under £10,000, so the claim totals £5,145.65. GOV.UK suggests sending a new invoice that adds the interest.

Simple versus compound interest

The calculator uses simple interest for every jurisdiction except India's MSMED row. Simple interest is what the EU Late Payment Directive prescribes, since Article 2(6) defines statutory interest as simple interest at the reference rate plus at least eight percentage points, and what the UK Act provides: under section 1 a qualifying debt carries simple interest, and GOV.UK's worked example divides the yearly figure by 365 for a daily one. India's MSMED Act is different: where a buyer has not paid a micro or small supplier by the date agreed in writing, which section 15 caps at 45 days from acceptance of the goods or services, or within 15 days of acceptance where no date is agreed, section 16 requires compound interest with monthly rests at three times the bank rate notified by the Reserve Bank of India. For the India row the calculator therefore adds each month's interest to the balance: a rest falls every month on the day of the month interest started, and a month's interest is the balance times the rate times that month's days over 365. The Act fixes the monthly rests and the rate; where in the month a rest falls and how a part month is counted are this calculator's method, so check them against the award or contract you are working from. The gap from simple interest grows with time: £10,000 at 11.75 percent simple accrues £1,175 in a year, while the same nominal rate compounded monthly accrues £1,240.

Reading contract interest clauses

Clauses you may see in business contracts: "interest at 1.5% per month" (18 percent a year as simple interest, about 19.56 percent if compounded monthly), "the lesser of 18% per annum and the maximum permitted by law" (which defers to any cap in the governing law), and "ECB reference rate plus 8 percent" (the Late Payment Directive's own formula, written into the contract). For a contractual jurisdiction, enter the annual rate the clause produces and the calculator applies it as simple interest; if the clause compounds, the figure shown is the lower one. In Canada, section 4 of the Interest Act limits a rate stated per day, week or month to 5 percent a year unless the contract also states the yearly equivalent.

For informational purposes only

This calculator provides general estimates based on business day counting rules. It does not constitute legal advice. Deadlines in legal, regulatory, or contractual matters may be subject to jurisdiction-specific rules, court orders, or statutory exceptions. Always verify critical deadlines with a qualified professional.

Frequently Asked Questions

How does the UK Late Payment Act work?
The Late Payment of Commercial Debts (Interest) Act 1998 implies a right to statutory interest into business-to-business contracts. Under section 4, interest runs from the day after the agreed payment day or, where no day was agreed, after the end of the relevant 30-day period, subject to the Act's limits on long agreed terms. The rate is 8 percent a year over the Bank of England rate in force on the 30 June or 31 December before interest starts to run. Section 5A adds a fixed sum per debt: £40 for a debt under £1,000, £70 from £1,000 to under £10,000 and £100 for £10,000 or more, plus reasonable recovery costs above that sum. GOV.UK notes that statutory interest cannot be claimed where the contract sets a different rate.
How does the EU Late Payment Directive work?
Directive 2011/7/EU defines statutory interest for late payment as simple interest at the reference rate plus at least eight percentage points; for countries using the euro, the reference rate is the European Central Bank's main refinancing rate. The creditor is also entitled to a fixed sum of at least EUR 40, payable without a reminder. A payment period agreed between businesses may not exceed 60 calendar days unless expressly agreed and not grossly unfair to the creditor, and public authorities must in general pay within 30 calendar days. National law may go further: Germany sets nine percentage points over the base rate where no consumer is involved (BGB § 288(2)), and in France, service-public.fr explains, the Code de commerce recommends the ECB's key rate plus 10 points for late-payment penalties, with a EUR 40 recovery charge per invoice.
Why does the calculator hold no US statutory rate?
The calculator has no United States rate built in. The federal rules it could draw on, the prompt payment rules in FAR subpart 32.9, apply to invoice payments on federal government contracts: FAR 32.904 sets when the agency's payment is due, and under FAR 32.907 the paying office adds an interest penalty automatically when it pays after that date. Those rules do not cover payments between private businesses, and the calculator holds no state's rate either, so for the United States it applies the rate you enter: the one your contract states.
Does the calculator use simple or compound interest?
Simple interest for every jurisdiction except India's MSMED row. The EU Directive defines statutory interest as simple interest, section 1 of the UK Act says a qualifying debt carries simple interest, and GOV.UK's example divides a yearly figure by 365. India's MSMED Act requires compound interest with monthly rests at three times the RBI bank rate when a micro or small supplier is not paid by the date agreed in writing (at most 45 days from acceptance) or, with no agreed date, within 15 days of acceptance, so the India row adds each month's interest to the balance, with a rest every month on the day of the month interest started. Where your contract specifies compounding in another jurisdiction, the figure here is lower than the contract gives.
How do I read a contract clause that says interest of 1.5 percent per month?
Multiply by 12 for the annual rate: 1.5 percent per month is 18 percent per year, which is the figure to enter as the contractual rate. If the clause compounds monthly, the effective annual rate is 1.015 to the power of 12, minus 1, or about 19.56 percent; the calculator applies simple interest, so its figure is then the lower one. Wording such as per annum points to a yearly rate, and compounded monthly is explicit.

Sources for these rules

Checked October 12, 2026. All sources